How to install MTS datacard in Ubuntu

Go to Terminal and do the following,

    1. Install the packages using the following commands
      • sudo apt-get install wvdial
      • sudo apt-get install usb-modeswitch
      • sudo apt-get install usb-modeswitch-data
    2. Edit the Configuration file using the command
      • sudo gedit /etc/wvdial.conf
    3. Now a file will be opened in gedit. Add the following lines to that file at the end,

      [Dialer mts]
      Stupid Mode = 1
      Inherits = Modem0
      Password = mts
      Username =
      Phone = #777
      Init1 = ATZ
      SetVolume = 0
      Modem = /dev/ttyUSB0
      Baud = 115200
      FlowControl = Hardware (CRTSCTS)
      Dial Command = ATDT

    4. Save the File and close.
    5. Execute the command,
      • sudo wvdial mts
    6. Now the modem will get initialized and an output showing the ip address etc will come.
    7. Leave the terminal opened and use the browser and check the internet

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s